Still Loved Even In The New World
CHAPTER 133: Gifts, Ready...!

The most important next step was to create a configuration between the Magic Stone and the Mana Vessel on the weapon. Well, it is more appropriate to call it to make a magic circuit to connect all the components so that it can work perfectly.

This is the same as putting a cable circuit as connecting a lamp with a power source. If the electrical circuit is wrong, of course the lamp will not turn on as it should, or even there will be an electrical short circuit. Lucky if the stick doesn't work, but what if it explodes. It wouldn't be funny if I would be mistaken for trying to commit murder to the Queen, would it?!!.

I took out a golden pen and a bottle of transparent ink. This ink is a special ink that is extracted from the monster core.

I dipped the pen in ink and poured mana and mental strength into the pen. When the tip of the pen touches the surface of the stick, the tip of the pen will emit a gold-colored light following the mark made by the tip of the pen. The light only lasted for a moment and disappeared and was absorbed into the staff.

I'm not original in the making of this mana circuit. Each line and pattern that is interconnected has its own meaning, such as copper grooves on circuit boards. With the presence of these lines, the magic wand had turned into a catalyst where, or if it was easier, it was actually the same as the circuit board. It's just that, which is supported by this circuit board is a magical component in the form of magic crystals. After the entire line and symbol were connected and functioning properly, I took a deep breath and exhaled it to make me more relaxed.

«Enchant: Start»

A green transparent layered magic circle suddenly appeared before me. The magic circle had a six-pointed star in the middle with many mysterious runes that no ordinary person could understand.

I pressed my hand against the rune surface and suddenly a green transparent screen appeared above the magic circle.

This is one of the processes that must be done after the magic circuit is created, which is an enchantment process that is similar to entering a program on a computer to give commands or for the computer to perform certain functions. I again used the pen to write on the transparent green board, but this time I did not use ink, but purely from my mental strength.

This process is quite simple, I just need to write the basic functions of the weapon I want to make. Nonetheless, the functions I wrote about would change when the stick was finished. There will be adjustments between the material, quality, and level of the weapon with the functions you write. The higher the quality, the more functions that can be installed.

Finally after my hard work, I managed to finish this stick. The transparent green board that had been empty, now had many words that had a certain arrangement.

I need to say that the program on earth has been very easy. If in the past humans needed to write a lot of program code then the computer would translate it into an action or command. Now it's different. Humans only need to write sentences in a certain order and the computer will automatically break those words into programming languages independently. So, because in Alterion based on the way of programming like that, now even though it has changed into the real world, but the way of doing it does not change in the slightest.

«Enchant: Done»

«Install»

When I finished installing the program, the green screen disappeared into the stick along with the magic circle. The stick immediately emitted a dazzling golden white light. After the light died down, I noticed that the body of the originally silver stick became milky white like white jade with gold-colored Phoenix bird ornaments.

I feel very satisfied with my forging ability. I immediately saw the attributes of this magic wand.

 -----------------------------------

«_» (Epic)

Attribute:

Mana: +1000

INT. :+130

Crit. 50%

Effect:

Double Spell Casting: Can cast two different magic at the same time.

Exceeding Boundaries: Can cast magic higher 3 LV than castors.

Protector: Provides a magic shield to the caster that can protect a long-range attack of 1000 damage. (CD:12h after shields are destroyed)

Special effect (passive):

Automatic Recovery: Recovers Castor's injury automatically and restores Castor's HP to full state. (CD:24 h)

Charging: Automatically recover Mana casters by 2%/5s.

Nirvana: Automatically recover the stick from damage.

Skills:

Fenghuang: Launching two Phoenix-shaped fire attacks that would inflict 3000 damage on a fan-shaped area of 20 meters. (CD:12b).

Phoenix Breath: Removes a hot temperature that burns a 3m diameter circular shaped area with the caster as the center. Damage to everyone in the area is 1000. (Duration: 3s). (CD:3b).

The Phoenix Rage: Create a flood of hot lava in a fan-shaped area and will sweep anything in front of it and will deal damage of 500-1000 continuously for 3m on everything in the area effect. (CD:3b)

Terms of use:

INT: 100MAX.

Dex: 70th.

MP :100S.

Lv. :120+.

 __________________________

Looking at the Magic Staff attribute I managed to create, I felt a little satisfied. Not in vain all my exhaustion in fighting to make it.

I didn't name this stick. I want the name of this wand handed over to the queen to name it herself. It's his birthday present anyway.

I took a moment to replenish my mental strength. As I sat down and rested, Ilma brought a dry clean cloth to wipe away some of the sweat grains that were condensing on my forehead.

Filia:"Thank you, Ilma."

It was then that many students gathered around me and looked at me with curious faces.

Rendal:"K, chief.what was that?."

Rendal asked me with bewildered eyes and there was some hope in the sparkle of those eyes, but all were dominated by eyes that sparkled with desire.

Philia:"Isn't that forging?."

I answered that question rhetorically. I don't know yet what the forging process in this world is like, so I don't know why he's asking such an obvious thing.

Rendal:"I know, but it's very different than usual."

Rendal:"The princess made a magic wand, right?!."

Philia:"Yes."

Rendal:"Usually if making a magic wand out of wood, the craftsmen would carve the log by hand, not hit it with a hammer. Then, once completed, it will be coated using a metal liquid and fitted to the component by the forger. Last stage; we'll do Enchant to put it all together. But the chairman's way is very different. Can you please give me a little knowledge?."

Philia:"Well, that's very different. The way you make the stick is like putting a layer of gold on a stone. So, even though it looks like gold, its price will always be inferior to pure gold. Different from the way I made the stick . Not only did I coat the logs on the outside, but I also used metal to directly change the structure and properties of the wood. If you hit ordinary wood, it will be destroyed, but when combined with metal, it will be forged into any shape like real metal. Especially if we use magic metal, then the nature of the mana conductor on the wood will improve greatly. Plus, the resistance on the stick will also increase."

If it followed the way they made the staff, it would only produce low-grade magic weapons. Especially when making sticks. By carving using a knife or other tool, it will probably cut the mana vessels on the wood, which will eventually inhibit the distribution of mana and as a result, it will slow down the occurrence of magical phenomena.

Rendal:"But, we usually use the metal insulator as the outer layer so that the inner mana of the stick does not leak. But, I feel that all the metal you use is a conductor of mana. Wouldn't that make the use of mana even more wasteful?."

To that question, I thought about it for a moment until I found out the reason.

Filia:"Do you know why you use which insulator?."

Rendal:"That's to isolate which so that no leakage occurs and save which use."

Filia:"Then, do you know why there was a leak?."

Rendal:"That's..., that's because it's made of wood and wood can't keep mana inside because where will it leak through the pores on the wood, maybe?!."

I could see his facial expression that was unsure of his own answer. Maybe that's how they were taught. Well, after all they know how to make magic and other weapons from the relics of ancient civilizations.

Philia:"that's not entirely true. Although it was indeed to isolate mana, but it was not to isolate which mana was leaking from the pores of the wood."

Ilma:"Daughter, your tea."

Filia:"Thank you."

my explanation was cut off by Ilma who handed over the tea. The timing is very precise. Due to the hot temperature of the fire and the long explanation, I needed to wet my somewhat dry throat.

I sipped a sip of tea and moistened my throat. After feeling comfortable to talk again, I went back to explaining to them.

Filia:"Actually the pores in wood do not play a big role in mana leakage. What they really want to cover is a leak caused by which vessels are cut. Which vessel is where it will travel, like blood in a vein. If a blood vessel ruptures, it will cause bleeding even to the point of running out of blood. Same with which vessel will throw the user mana into the air if the vessel where it is cut off as a result of the process of carving a wooden rod."

Rendal:"Then, what about you who use which conductor?."

Filia:"Despite using the way I forged it earlier, I also could not avoid the cut mana vessels that were exposed to the exit. So, I used a metal that absorbs the external mana in the air and connects it with the pores that were exposed to the outside. That way, the mixing between the internal and external mana would result in more powerful magic, but would reduce the use of mana casters."

The way it works is similar to gasoline-based vehicle engines of the past. Gasoline will burn in the engine with the help of oxygen. The more oxygen, the more efficient the use of fuel in the vehicle.

It's very similar. By combining the external mana in the air as oxygen that is channeled through the pores that leak and the internal mana of the caster as gasoline, then the effect will be similar to that I described earlier. In short, it was half an effort with twice the results.

srek...

I heard the sound of a stationery scraping paper. When I looked up to the others, they had already prepared the notes very seriously.

"M, sorry..."

I saw a boy with an age that looked quite mature, maybe 11-12 years old. He held up his hand high with a pencil still stuck between his fingers.

Philia:"Yes. Can I help you?."

For some reason the boy suddenly became timid, but there was still a spirit flame in his eyes. The boy took a deep breath and looked at me again with a stern look.

"I just want to ask you a question. You mentioned which vessels on the wood. Then, how about the manufacture of a magic sword that was entirely of metal."

Yes, metal does have to be forged and it is unlikely that the vessel will not break. Even in the process of forging, the mana vessels will always fall apart due to the folding of the forged metal.

Filia:"That is, we usually make artificial mana vessels called runes."

We continued to have a question and answer session for a while longer. I want to immediately settle this matter and proceed to the manufacture of the witch robes. So, I took the initiative to stop this session and continue my work. I feel that if this question and answer session continues, then there will not be enough time for today.

(yes.... My fingers are getting tired typing >.<)

I continued and began to sort out the materials I had prepared earlier. The process of making magic robes is not as complicated as making magic weapons that are forged. In the manufacture of magician robes, we only need to have a fairly high sewing ability.

I took the red deer fur and cut it lengthwise like a robe. For the snow-diamond fox fur, I used it as a fur collar.

I just need to sew and put it all together using the golden silk thread earlier. The inside of the robe was also covered using a layer of solemn fabric that could withstand attacks to a certain extent.

After that, I also need to install the program like I did on the stick earlier. With all these processes, the making of the cloak can be said to be completed.

Just like I explained at the beginning. Where will flow through the vessel where. But, in this book, the mana vessels are only on the thin layer of animal skin beneath the book. Therefore, the mana vessels in this cloak are classified as incomplete.

For that, I need to make runes from materials that can drain mana well in this robe. The material of making such runes was usually liquid or monster blood, but since this was a robe, I couldn't do that. So I chose an alternative material in the form of gold silk thread earlier.

I made a golden Phoenix bird embroidery on the back of that robe. The Phoenix embroidery was a fusion of various fine lines. The result of this embroidery creates a beautiful Phoenix bird pattern, but it is also very complicated.

These were no ordinary lines, but these were the rune lines that I had arranged to form a Phoenix bird. Think of it as rune calligraphy.

After all the process was completed, I managed to create a hot orange red robe that strongly reflected nobility. With the addition of embroidered motifs on his back, it caused the person wearing this robe to look more graceful and dignified. Well I made this witch's robe using a reference to the royal robes of queens from the eastern countries of the past.

Finally after the afternoon, I managed to complete all the manufacturing process of these two objects. I immediately put these two things into two different boxes, then wrapped them in a red satin cloth that I had prepared beforehand. On top of the satin cloth was embroidered the Rosefield family emblem of golden thread.

Satisfied with the results, I immediately saved these two neat boxes into storage.

I sat down while drinking tea to refresh my thirst after being exhausted for the whole day. It is not only physical ability that is consumed, but also mental strength that continues to be used such as burning oil during the forging and production process.

Well, at least I'm relieved once everything's done. Furthermore, tomorrow I only need to attend the queen's birthday party.

^^^(end of this chapter)^^^

Find errors and have suggestions, do not forget to move your fingers and type everything in the comments column. See you next time;)